The engine crankshaft position sensor reads a toothed reluctor ring on the crankshaft or flywheel and tells the engine computer how fast the engine is turning and where each piston is. Ignition and fuel injection timing depend on that signal, so when it drops out the engine may crank but not start, or stall while driving. Heat is a frequent cause, and many failing sensors cut out when the engine is hot and work again once it cools; oil leaks, damaged wiring and a damaged reluctor ring are others. Codes P0335 or P0336 often point here. We carry these sensors from several brands, led by Holstein, Mitsubishi Electric, Beck/Arnley and Bremi. Mitsubishi, BMW, Nissan, Audi and Volkswagen have the most coverage.
Right now we have 91 in stock from 8 brands.
Showing 1–24 of 105 resultsSorted by latest
Crankshaft sensors look similar to camshaft sensors and are sometimes mounted nearby, so confirm which one your code or diagnosis points to. Then match:
Inspect the connector and wiring before replacing the sensor; a chafed harness or oil inside the connector can cause the same codes.
The engine computer relies on a clean, accurately timed signal, so the replacement must match the original sensor type and mounting depth. Quality aftermarket sensors are designed to do this and are widely used. On some engines owners prefer an OEM-brand sensor, and a few listed here carry an OEM label.
Crankshaft sensors have no service interval; they are replaced when they fail. Disconnect the battery, clean the mounting bore, lightly oil the new O-ring and seat the sensor fully before tightening the bolt. Some vehicles need a crankshaft position relearn with a scan tool after replacement, and the check engine light may stay on until it is done. Check your service information for your model.
Yes. Heat-related failures are common, with the engine stalling or refusing to restart when hot and starting again after it cools.
The crankshaft sensor reports engine speed and piston position; the camshaft sensor tells the computer which stroke each cylinder is on. They often look alike but are not interchangeable.
Some vehicles require a crankshaft position relearn with a scan tool. Check your service information; others need nothing beyond clearing the codes.
P0335 and P0336 are the common crankshaft position sensor codes. Check the wiring and connector before replacing the sensor.
Select your vehicle and engine in the vehicle filter. If you are unsure, email [email protected] or call (281) 271-4273 with your VIN.
Symptoms, causes and checks for these parts, from our repair guides.